Search results
Jump to navigation
Jump to search
- ...nteracting intrinsically, or by adding some add-on graphical interfaces to increase the user-friendliness through the design-flow. ...SII is proposed with custom scripting and graphical interfaces in order to increase the user-friendliness for a fluent flow.2 KB (265 words) - 11:16, 23 August 2022
- I'm now trying to increase the number of designs on a die by an order of magnitude, to further lower t1 KB (186 words) - 22:33, 1 August 2022
- ...impact of their energy supply. In this context, new methods are needed to increase the repairability, reconfigurability and reusability of systems, as well as2 KB (271 words) - 16:34, 20 October 2023
- ...ist e-waste reverse engineering laboratory. Our objective is to reduce the increase of e-waste by finding ways to repurpose electronic waste.2 KB (273 words) - 00:05, 11 July 2023
- ...synthesizing Iguana with Yosys. Particularly two reasons for a significant increase in the area and the critical path in some modules of the design.2 KB (284 words) - 22:16, 28 July 2023
- ...for the locations marked with "unpublished". The publication will further increase the transparency of the selection process, and will offer to the broad publ2 KB (307 words) - 12:05, 17 June 2022
- ...pedia.org/wiki/Rebound_effect_(conservation) ) which has caused an overall increase, rather than decrease, of the environmental impact of the ICT sector. Posit ...project for acting on electronics carbon impact: refurbish, reuse, repair, increase reliability, reduce, recycle (6Rs https://www.eecone.com/eecone/home/ ). Fo7 KB (1,092 words) - 22:10, 30 September 2023
- ...ails. The output signal is ''pushed'' out by the approaching input signal. Increase of the propagation delay should also be treated as a failure because it cou ...denoted with the ''roll-off factor'', which defines an acceptable relative increase of the clock-to-output delay in percent. Since the clock-to-output delay ca16 KB (2,531 words) - 18:36, 21 May 2021
- ...equencies get higher and higher and fabrication techniques evolve to 3D to increase the devices density per area, rendering accurate parasitic extraction<ref>[8 KB (1,120 words) - 17:58, 16 July 2019